YAW RATE AND ACCELERATION SENSOR (for Separate Type Yaw Rate Sensor) > INSTALLATION |
| 1. INSTALL YAW RATE SENSOR BRACKET |
![]() |
Install the yaw rate sensor bracket with the 2 bolts.
Engage the 2 clamps to install the wire harnesses.
| 2. INSTALL NO. 3 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (w/ Smart Entry and Start System) |
Connect the connector to the No. 3 indoor electrical key antenna assembly.
Engage the clamp to install the No. 3 indoor electrical key antenna assembly to the yaw rate sensor bracket.
| 3. INSTALL YAW RATE SENSOR |
![]() |
Install the yaw rate sensor to the yaw rate sensor bracket with the 2 nuts.
| *a | Arrow Mark |
Connect the connector to the yaw rate sensor.
| 4. INSTALL CONSOLE BOX ASSEMBLY |
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |