Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM

AIR CONDITIONING SYSTEM > INITIALIZATION

for Preparation Click here



INITIALIZATION SERVO MOTOR
  1. Turn the ignition switch off.

  2. Connect the intelligent tester to the DLC3.

  3. Turn the ignition switch to ON.

  4. Press the A/C OFF switch.

  5. Turn the intelligent tester on.

  6. Enter the following menus: Body / Air Conditioner / Utility / Servomotor Initialization.

  7. According to the intelligent tester display, perform servomotor initialization.

    HINT:
    During initialization, the A/C AUTO indicator light comes on, and then goes off when initialization has finished.

  8. According to the intelligent tester display, select the "Exit" switch to finish initialization.