POWER SEAT SWITCH (for Front Side) > REMOVAL |
| 1. REMOVE FRONT SEAT ASSEMBLY |
| 2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB |
![]() |
Using a moulding remover, disengage the 4 claws to remove the slide and vertical power seat switch knob.
| 3. REMOVE RECLINING POWER SEAT SWITCH KNOB |
![]() |
Using a moulding remover, disengage the 4 claws to remove the reclining power seat switch knob.
| 4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER |
![]() |
Disconnect the rubber band of the separate type front seatback cover.
| 5. REMOVE NO. 1 FRONT SEAT INNER CUSHION SHIELD |
![]() |
Remove the screw.
Disengage the 2 claws to remove the front No. 1 seat inner cushion shield from the clip as shown in the illustration.
![]() |
Disengage the 3 claws and 3 guides to remove the front No. 1 seat inner cushion shield as shown in the illustration.
| 6. REMOVE FRONT SEAT CUSHION SHIELD (for Driver Side) |
![]() |
Disengage the 4 claws, 7 guides and clip to remove the front seat cushion shield.
![]() |
Disengage the 2 claws and open the wire harness cover.
| *1 | Wire Harness Cover |
Remove the wire harness from the wire harness cover.
Disengage the 2 wire harness clamps.
Disconnect the front power seat switch connector.
![]() |
Disconnect the front lumbar power seat switch connector.
| 7. REMOVE FRONT SEAT CUSHION SHIELD (for Front Passenger Side) |
![]() |
Disengage the 4 claws, 8 guides and clip to remove the front seat cushion shield.
![]() |
Disengage the 3 claws and open the wire harness cover.
| *1 | Wire Harness Cover |
Remove the wire harness from the wire harness cover.
Disengage the 2 wire harness clamps.
Disconnect the front power seat switch connector.
| 8. REMOVE FRONT POWER SEAT SWITCH |
![]() |
Remove the 3 screws and front power seat switch from the front seat cushion shield.