SLIDING ROOF SYSTEM > CUSTOMIZE PARAMETERS |
| 1. CUSTOMIZE SLIDING ROOF SYSTEM |
Customizing with the intelligent tester
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Utility / Customize / Power Window.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
| Door Key P/W Up | OFF | This function is used to close the power windows and sliding roof by operating the mechanical key. | OFF/ON | Main body ECU (Multiplex network body ECU) |
| Door Key P/W Down | OFF | This function is used to open the power windows and sliding roof by operating the mechanical key. | OFF/ON | Main body ECU (Multiplex network body ECU) |
| P/W Up W/ Transmit | OFF | This function is used to close the power windows and sliding roof using the wireless key transmitter. | OFF/ON | Main body ECU (Multiplex network body ECU) |
| P/W Down W/ Transmit | OFF | This function is used to open the power windows and sliding roof using the wireless key transmitter. | OFF/ON | Main body ECU (Multiplex network body ECU) |
Enter the following menus: Body / Sliding Roof / Utility / Customize / Slide Roof.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
| Door Key Related Operation | Slide | Function to select tilt up or slide open of sliding roof key-linked function. | Slide/Tilt | Sliding roof ECU (Sliding roof drive gear sub-assembly) |
| Wireless Key Related Operation | Slide | Function to select tilt up or slide open of sliding roof wireless transmitter-linked function. | Slide/Tilt | Sliding roof ECU (Sliding roof drive gear sub-assembly) |
| Front SW Auto Operation | ON | This function is used to enable or disable the auto operation. | OFF/ON | Sliding roof ECU (Sliding roof drive gear sub-assembly) |
Enter the following menus: Body / Main Body / Utility / Customize / Security.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
| Slide Roof Open Warning | ON | This function is used to enable or disable the sliding roof open warning. | OFF/ON | Main body ECU (Multiplex network body ECU) |