CLOCK > INSTALLATION |
| 1. INSTALL CLOCK ASSEMBLY |
Engage the 6 claws to install the clock assembly.
Install the clock assembly with No. 2 bezel with the 2 screws.
| 2. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY |
Connect the connector.
![]() |
Engage the 4 clips to install the No. 2 instrument panel register assembly.
| 3. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
![]() |
Engage the 7 clips and 2 guides to install the center instrument cluster finish panel sub-assembly.
| 4. ADJUST CLOCK |