Home › Vehicle Interior › LIGHTING (INT) › ROOM LIGHT

ROOM LIGHT > INSPECTION

for Preparation Click here



1. INSPECT SPOT LIGHT ASSEMBLY


    E228049E01
  1. Inspect the rear personal lights.

    1. Connect a positive (+) lead from the battery to terminal 4 (B) and a negative (-) lead to terminal 1 (E) or 2 (CTY).

      Result:

      Tester Connection
      Condition
      Specified Condition
      4 (B) - 1 (E)
      Rear personal light switches off
      Rear personal light LH and RH do not come on
      Rear personal light switch LH on
      Rear personal light LH comes on
      Rear personal light switch RH on
      Rear personal light RH comes on
      4 (B) - 2 (CTY)
      Rear personal light switches off
      Rear personal light LH and RH comes on
      Rear personal light switch LH on
      Rear personal light LH does not come on
      Rear personal light switch RH on
      Rear personal light RH does not come on

      Text in Illustration 
      *a
      Component without harness connected
      (Spot Light Assembly)
      If the result is not as specified, replace the bulb or spot light assembly.

  1. Inspect the rear spot light.

    1. Connect a positive (+) lead from the battery to terminal 3 (RILL) and a negative (-) lead to terminal 1 (E).

      Result:

      Tester Connection
      Condition
      Specified Condition
      3 (RILL) - 1 (E)
      Rear spot light switch off
      Rear spot light does not come on
      Rear spot light switch on
      Rear spot light comes on

      If the result is not as specified, replace the spot light assembly.