Home › Vehicle Interior › SEAT › REAR SEATBACK HEATER

REAR SEATBACK HEATER > INSPECTION

for Preparation Click here



1. INSPECT REAR SEAT BACK HEATER LH (SEPARATE TYPE REAR SEAT BACK COVER)


    B283412E01
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Rear Seat Back Heater LH (Separate Type Rear Seat Back Cover))

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    A-1 - B-4
    Always
    Below 1 Ω
    A-2 - B-1
    Always
    Below 1 Ω
    A-3 - B-5
    Always
    Below 1 Ω
    A-4 - B-3
    Always
    Below 1 Ω
    A-4 - B-2
    Always
    3.19 to 3.83 Ω

    If the result is not as specified, replace the rear seat back heater LH (separate type rear seat back cover).



2. INSPECT REAR SEAT BACK HEATER RH (SEPARATE TYPE REAR SEAT BACK COVER)


    B283414E01
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Rear Seat Back Heater RH (Separate Type Rear Seat Back Cover))

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 5
    Always
    3.19 to 3.82 Ω

    If the result is not as specified, replace the rear seat back heater RH (separate type rear seat back cover).