Home › Vehicle Interior › INTERIOR PANELS / TRIM › REAR SUNSHADE SYSTEM

REAR SUNSHADE SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



1. CUSTOMIZE REAR SUNSHADE SYSTEM

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Record the current settings before customizing.

  1. Customizing with the intelligent tester

    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Utility / Customize / Others.

    5. Select the setting by referring to the table below.

      Others 
      Display
      Default
      Content
      Setting
      Relevant ECU
      Rear Shade Delay Time
      0.7 s
      Function to change the time lag of the shift-linked operation
      0.7 s, 1.2 s, 0.9 s or 0.0 s
      Main body ECU (Multiplex network body ECU)
      R-pos to Rear Sun Shade COM
      ON
      Function to lower the rear sunshade when the shift lever is moved to R with the rear sunshade raised
      ON / OFF
      Main body ECU (Multiplex network body ECU)