Home › Vehicle Interior › SEAT › POWER SEAT SWITCH (for Rear Side)

POWER SEAT SWITCH (for Rear Side) > INSPECTION

for Preparation Click here



1. INSPECT COOLER CONTROL SWITCH ASSEMBLY (REAR SUNSHADE SWITCH)


    E228036E02
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    12 (ECU) - 16 (GND)
    Rear sunshade switch pushed
    Below 1 Ω
    12 (ECU) - 16 (GND)
    Rear sunshade switch not pushed
    10 kΩ or higher

    Text in Illustration 
    *a
    Component without harness connected
    (Cooler Control Switch Assembly (Rear Sunshade Switch))