REAR FLOOR LOWER FRONT CROSSMEMBER > ASSEMBLY REPLACEMENT



  1. K102357
    With the rear floor pan removed.

REMOVAL

Symbol meaning
K100014
Remove Weld Points
K100016
Remove Weld Points

K102168E01


INSTALLATION

Symbol meaning
K100014
Remove Weld Points
K100019
Plug Weld
K100021
Plug Weld
INSTALLATION POINT
  1. If the entire supply part is not needed, remove the part of the supply part that is needed.
  2. After welding, apply undercoating to the corresponding parts. (See the painting / coating)
  3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

K102341E01


K102169E01