RADIATOR SUPPORT > ASSEMBLY REPLACEMENT


K102352

REMOVAL

Symbol meaning
K100014
Remove Weld Points
K100016
Remove Weld Points
K100022
Cut with Disc Sander etc.

K102111E01


K102112E01


INSTALLATION

Symbol meaning
K100019
Plug Weld
K100021
Plug Weld
K100026
Fillet Weld
INSTALLATION POINT
  1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
  2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
  3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.
  4. Measure the dimensions before installing the headlights.

Reference Value 
Area
Measurement
Area
Measurement
*a
1483 mm (58.39 in.)
*b
822 mm (32.36 in.)
*c
1125 mm (44.29 in.)
*d
1042 mm (41.02 in.)
*e
837 mm (32.95 in.)
*f
1056 mm (41.57 in.)
*g
849 mm (33.43 in.)
-
-

K102189E01


K102188E02


K102113E01