FRONT SIDE MEMBER > ASSEMBLY REPLACEMENT (PATTERN 2)



  1. K101260
    With the radiator support and front fender apron removed.

REMOVAL

Symbol meaning
K100014
Remove Weld Points

K102129E01


INSTALLATION

Symbol meaning
K100014
Remove Weld Points
K100019
Plug Weld
INSTALLATION POINT
  1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
  2. If the entire supply part is not needed, remove the part of the supply part that is needed.
  3. Make sure to attach correctly in accordance with the body dimension diagram as this part affects the front wheel alignment.
  4. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)
  5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

K102126E02


K102130E01