COWL TOP SIDE PANEL > ASSEMBLY REPLACEMENT
REMOVAL
Symbol meaning
Remove Weld Points
Remove Weld Points
Cut with Disc Sander etc.
REMOVAL POINT
After removing the *1, remove the *2.
INSTALLATION
Symbol meaning
Remove Weld Points
Plug Weld
Plug Weld
INSTALLATION POINT
Divide a new part of cowl side reinforcement in to *1 and *2 at the weld points. After welding the *1 to the vehicle side, install the *2.
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.