AUTOMATIC TRANSAXLE SYSTEM > GENERAL



OUTLINE


  1. The U660E automatic transaxle is used. This automatic transaxle is a compact, lightweight and high-capacity 6-speed super Electronically Controlled Transaxle (ECT).



    1. This automatic transaxle is equipped with a Multi-mode Automatic Transmission function.


      X100025

  2. A transmission control cable assembly with a length adjustment mechanism is used. For details, refer to the Repair Manual.

  3. A shift pattern is provided that has an S position to the side of the D position.

  4. A shift lock system is used.



  5. A shift lock release button, which manually overrides the shift lock mechanism, is provided.


    X105831E01

  6. An ATF warmer (transmission oil cooler) is used.


SPECIFICATION
  1. Automatic Transaxle Assembly

    Transaxle Type
    U660E
    Gear Ratio
    1st
    3.300
    2nd
    1.900
    3rd
    1.420
    4th
    1.000
    5th
    0.713
    6th
    0.608
    Reverse
    4.148
    Differential Gear Ratio*1
    3.458
    Fluid Capacity*2
    Liters (US qts, Imp. qts)
    6.5 (6.87, 5.72)
    Fluid Type
    TOYOTA Genuine ATF WS
    Weight (Reference)*3
    kg (lb)
    95.0 (209.4)

    1. *1: Counter gear ratio included
    2. *2: Differential included
    3. *3: The weight shown is the weight of the part fully filled with fluid.

    C1
    No. 1 Clutch
    No. of Discs
    4
    C2
    No. 2 Clutch
    3
    B1
    No. 1 Brake
    4
    B2
    No. 2 Brake
    5
    B3
    No. 3 Brake
    3
    F1
    No. 1 One-way Clutch
    No. of Sprags
    20
    Ravigneaux Planetary Gear Unit
    No. of Front Sun Gear Teeth
    27
    No. of Rear Sun Gear Teeth
    30
    No. of Long Pinion Gear Teeth
    20
    No. of Short Pinion Gear Teeth
    22
    No. of Ring Gear Teeth
    69
    U/D Planetary Gear Unit
    No. of Sun Gear Teeth
    66
    No. of Pinion Gear Teeth
    21
    No. of Ring Gear Teeth
    110
    Counter Gear
    No. of Drive Gear Teeth
    44
    No. of Driven Gear Teeth
    47

  2. Torque Converter Assembly

    Torque Converter Type
    3-element, 1-step, 2-phase
    Stall Torque Ratio
    1.78