FEATURES > PERFORMANCE



OUTLINE


  1. 2AR-FE Engine



    1. The 2AR-FE engine is an in-line 2.5-liter, 16-valve DOHC engine. This engine uses a Dual Variable Valve Timing-intelligent (VVT-i) system, Direct Ignition System (DIS), Acoustic Control Induction System (ACIS) and Electronic Throttle Control System-intelligent (ETCS-i). These control functions achieve improved engine performance, fuel economy, and clean emissions.


      V101552


      Item
      Specification
      No. of Cyls. & Arrangement
      4-cylinder, In-line
      Valve Mechanism
      16-valve DOHC with Dual VVT-i
      Fuel System
      SFI
      Displacement
      cm3 (cu. in.)
      2494 (152.2)
      Max. Output (SAE-NET)
      kW@rpm (HP@rpm)
      133@6000 (178@6000)
      Max. Torque (SAE-NET)
      N*m@rpm (ft.*lbf@rpm)
      231@4100 (170@4100)*1
      226@4100 (167@4100)*2
      *1: Tire2-Bin5
      *2: ULEVIII-PZEV



  2. 2GR-FE Engine



    1. The 2GR-FE engine is a 3.5-liter, 24-valve DOHC V6 engine. This engine uses a Dual VVT-i (Variable Valve Timing-intelligent) system, Direct Ignition System (DIS), Acoustic Control Induction System (ACIS) and Electronic Throttle Control System-intelligent (ETCS-i). These control functions achieve improved engine performance, fuel economy, and clean emissions.


      V101553


      Item
      Specification
      No. of Cyls. & Arrangement
      6-cylinder, V-type
      Valve Mechanism
      24-valve DOHC with Dual VVT-i
      Fuel System
      SFI
      Displacement
      cm3 (cu. in.)
      3456 (210.9)
      Max. Output (SAE-NET)
      kW@rpm (HP@rpm)
      200@6200 (268@6200)
      Max. Torque (SAE-NET)
      N*m@rpm (ft.*lbf@rpm)
      336@4700 (248@4700)
      *: Maximum output and torque ratings are determined using the revised SAE J1349 procedure.



  3. U660E Automatic Transaxle



    1. A U660E 6-speed multi-mode automatic transaxle is used.


      V101542


      Transaxle Type
      U660E
      Combination with Engine
      2GR-FE
      Gear Ratio
      1st
      3.300
      2nd
      1.900
      3rd
      1.420
      4th
      1.000
      5th
      0.713
      6th
      0.608
      Reverse
      4.148
      Differential Gear Ratio*
      3.458
      *: Counter gear ratio included



  4. U760E Automatic Transaxle



    1. A U760E 6-speed multi-mode automatic transaxle is used.


      V101543


      Transaxle Type
      U760E
      Combination with Engine
      2AR-FE
      Gear Ratio
      1st
      3.300
      2nd
      1.900
      3rd
      1.420
      4th
      1.000
      5th
      0.713
      6th
      0.608
      Reverse
      4.148
      Differential Gear Ratio*
      3.634
      *: Counter gear ratio included



  5. Suspension

    1. A MacPherson strut type independent suspension is used for the front.



    2. A dual link MacPherson strut type independent suspension is used for the rear.


      V101538



  6. Steering



    1. The Electric Power Steering (EPS) system uses a power steering motor, a power steering torque sensor and a reduction mechanism that are built into the steering column assembly to generate assist torque, in order to assist the driver's steering effort.


      V101539E01


      Text in Illustration 
      *1
      Steering Gear Assembly
      *2
      Steering Column Assembly

  7. Brake

    Item
    Specification
    Front Brake
    Type
    Ventilated Disc
    Rotor Size (D x T)*
    mm (in.)
    296 x 28 (11.65 x 1.10)
    Rear Brake
    Type
    Solid Disc
    Rotor Size (D x T)*
    mm (in.)
    281 x 10 (11.06 x 0.39)
    Brake Control System
    ABS with EBD, Brake Assist, TRAC, and VSC
    *: Diameter x Thickness