EXHAUST SYSTEM > DETAILS



CONSTRUCTION


  1. Exhaust Manifold Sub-assemblies (RH and LH)



    1. Stainless steel exhaust manifolds with an integrated Three-Way Catalytic converter (TWC) are used for warm-up of the TWC in the front exhaust pipe assembly and for weight reduction.


      W104499E01


      Text in Illustration 
      *1
      TWC
      *2
      Exhaust Manifold Sub-assembly RH (for Bank 1)
      *3
      Exhaust Manifold Sub-assembly LH (for Bank 2)
      -
      -



  2. Exhaust Pipe

    1. The exhaust pipes are made of stainless steel for improved rust resistance.

    2. A thin-wall, ceramic type TWC is used.



    3. Tail exhaust pipe assemblies are used to ensure engine performance and reduce exhaust noise.


      W104500E01


      Text in Illustration 
      *1
      Front Exhaust Pipe Assembly
      *2
      TWC
      *3
      Sub Muffler
      *4
      Center Exhaust Pipe Assembly
      *5
      Tail Exhaust Pipe Assembly RH
      *6
      Tail Exhaust Pipe Assembly LH