EXHAUST SYSTEM > DETAILS



CONSTRUCTION


  1. Exhaust Manifold Sub-assembly



    1. A stainless steel exhaust manifold with an integrated Three-Way Catalytic converter (TWC) is used for warm-up of the TWC and for weight reduction.


      W105605E01


      Text in Illustration 
      *A
      Tier2-Bin5 Certified Models
      *B
      LEVIII-PZEV Certified Models
      *1
      TWC
      -
      -



  2. Exhaust Pipe

    1. The exhaust pipes are made of stainless steel for improved rust resistance.

    2. A thin-wall, ceramic type TWC is used.

    3. A tail exhaust pipe assembly is used to ensure engine performance and reduce exhaust noise.



    4. A ball joint is used to join the exhaust manifold and front exhaust pipe assembly, and another ball joint is used to join the center exhaust pipe assembly and tail exhaust pipe assembly. As a result, in-vehicle sound has been muffled, vibration has been minimized, and weight reduction has been realized.


      W104474E01


      Text in Illustration 
      *1
      Compression Spring
      *2
      Gasket
      *3
      TWC
      *4
      Main Muffler
      *5
      Sub Muffler
      *6
      Front Exhaust Pipe Assembly
      *7
      Center Exhaust Pipe Assembly
      *8
      Tail Exhaust Pipe Assembly
      *a
      Ball Joint
      -
      -