REAR SUSPENSION SYSTEM > DETAILS



CONSTRUCTION


  1. Rear Shock Absorber Assembly (Models with 2AR-FE Engine)

    1. A low-pressure (N2) gas sealed rear shock absorber assembly with a multi-leaf type linear control valve is used to realize driving stability and riding comfort.



    2. A multi-leaf type linear control valve is used in order to attain the linear damping force characteristics.


      X106206E01


      Text in Illustration 
      *1
      Low-pressure Gas (N2)
      *2
      Multi-leaf Type Linear Control Valve
      *3
      Backing Valve
      *4
      Inner Valve



  2. Rear Shock Absorber Assembly (Models with 2GR-FE Engine)

    1. A low-pressure (N2) gas sealed rear shock absorber assembly with a multi-leaf type linear control valve is used to realize driving stability and riding comfort.



    2. A multi-leaf type linear control valve is used in order to attain the linear damping force characteristics.


      X105849E01


      Text in Illustration 
      *A
      Models without Paddle Shift Switch
      *B
      Models with Paddle Shift Switch
      *1
      Low-pressure Gas (N2)
      *2
      Multi-leaf Type Linear Control Valve
      *3
      Backing Valve
      *4
      Inner Valve
      *5
      Rebound Spring
      -
      -
      V100135
      Oil Flow
      V100136
      Compression Force



    3. A rebound spring is used to ensure vehicle stability during cornering*. The built-in rebound spring is designed to function with the suspension spring in order to restrain suspension extension during rebound. Also, in order to realize a soft and comfortable ride, only the suspension springs are used when the suspension stroke is small during normal driving. However, when cornering, load is removed from the inner wheels, the functions of both the rebound spring and the suspension spring interact and the extension of the suspension is restrained. As a result, the vehicle has excellent maneuverability and stability.
      *: Models with paddle shift switch


      X106205E01