PARKING ASSIST MONITOR SYSTEM > DETAILS |
| FUNCTION OF MAIN COMPONENTS |
| Component | Function |
| Rear Television Camera Assembly | Captures images of the area behind the vehicle and outputs video signals to the radio and display receiver assembly. |
| Radio and Display Receiver Assembly | Displays the image of the area behind the vehicle sent from the rear television camera assembly using the multi-display. The image is combined with the parking assist guide lines that are calculated based on signals from the spiral with sensor cable sub-assembly (steering angle sensor). |
| Park/Neutral Position Switch Assembly | Sends a shift R position signal to the radio and display receiver assembly. |
| Steering Sensor | Detects the angle of the steering wheel and sends the resulting signals to the radio and display receiver assembly. |
| Combination Meter Assembly | Transmits the vehicle speed signal to the radio and display receiver assembly. |
| Luggage Compartment Door Lock Assembly - Luggage Compartment Door Courtesy Switch | Sends the luggage compartment door courtesy switch signal to the radio and display receiver assembly via the main body ECU (multiplex network body ECU). |
| OPERATING CONDITION |
Parking Assist Monitor System
The parking assist monitor system operates when both of the following conditions are met:
| FUNCTION |
Area Displayed on Screen
On the display, objects on the right of the vehicle appear on the right side of the display panel, and objects on the left of the vehicle appear on the left side of the display panel.
The rear television camera uses a wide-angle lens. The perceived distance from images that appear on the screen differs from the actual distance.

Warning Message
A warning message appears at the bottom or center of the screen under the following conditions. The warning message appears in the same language that has been selected by the language selector of the multi-display.
| Warning Message | Condition |
| Check surroundings for safety. | This message always appears during system operation. |
| System initializing. | This message appears when the steering wheel is operated while the battery terminal (-) is disconnected and then the terminal is reconnected. |
| Guidance is unavailable. | This message appears if there is a malfunction in this system. |
| Warning Message | Condition |
| System not ready. | This message appears if the system is not initialized. |
Calibration Following Parts Replacement
| Adjustment Items | Condition |
| Neutral steering point in memory | System initializing is displayed. |
| Steering angle setting |
|
| Camera optical axis adjustment |
|
| Parking assist monitor system initialization | Radio and display receiver assembly is replaced. |
| CONSTRUCTION |
Rear Television Camera Assembly
The rear television camera assembly consists of a wide-angle lens and a Complementary Metal Oxide Semiconductor (CMOS).

| *1 | Wide-angle Lens | - | - |
Multi-display (Parking Assist Monitor Display)
Manual Assist Mode

| *A | Parking Guide Line Mode | *B | Guide Line Deletion Mode |
| *C | Estimated Guide Line Mode | - | - |
| *1 | Line Mode Button | - | - |

| Item | Description | |
| (1) | Distance Guide Line (Red) | Indicates a position on the ground about 0.5 m (1.5 ft.) behind the rear bumper. |
| (2) | Vehicle Width Extension Guide Line (Blue) | Indicates the estimated vehicle width. |
| (3) | Parking Assist Guide Line (Blue) | Indicates the path the vehicle will follow if the driver turns the steering wheel fully. |
| (a) | Line Mode Button | Pressing this button changes the rear view monitor mode. |
| (b) | Parallel Parking Assist Mode Button | Pressing this button turns parallel parking assist mode on. |
| (c) | Warning Message Display Area | Area where warning messages are displayed. |

| Item | Description | |
| (1) | Distance Guide Line (Red) | Indicates a position on the ground about 0.5 m (1.5 ft.) behind the rear bumper. |
| (a) | Line Mode Button | Pressing this button changes the rear view monitor mode. |
| (b) | Parallel Parking Assist Mode Button | Pressing this button turns parallel parking assist mode on. |
| (c) | Warning Message Display Area | Area where warning messages are displayed. |

| Item | Description | |
| (1) | Distance Guide Line (Yellow) | Moves together with estimated guide lines in sync with the steering wheel. The center of the line indicates a position on the ground about 1.0 m (3.0 ft.) behind the rear bumper. |
| (2) | Distance Guide Line (Red) | Moves together with estimated guide lines in sync with the steering wheel. The center of the line indicates a position on the ground about 0.5 m (1.5 ft.) behind the rear bumper. |
| (3) | Distance Guide Line (Blue) | Indicates a position on the ground about 0.5 m (1.5 ft.) behind the rear bumper. |
| (4) | Vehicle Width Extension Guide Line (Blue) | Indicates the estimated vehicle width. |
| (5) | Estimated Guide Line (Yellow) | Moves in sync with the steering wheel to indicate the estimated reverse course of the vehicle. |
| (a) | Line Mode Button | Pressing this button changes the rear view monitor mode. |
| (b) | Parallel Parking Assist Mode Button | Pressing this button turns parallel parking assist mode on. |
| (c) | Warning Message Display Area | Area where warning messages are displayed. |
Parallel Parking Assist Mode

| *A | Standard Mode | *B | Narrow Mode |
| *1 | Space needed for parking | *2 | Display Status |

| Item | Description | |
| (1) | Black and Yellow Vertical Line | Serves as a reference position for starting parallel parking |
| (2) | Blue Outline |
|
| (3) | Parking Guide Line (Blue) |
|
| (4) | Estimated Guide Line (Yellow) | Moves in sync with the steering wheel to indicate the estimated reverse course of the vehicle. |
| (5) | Vehicle Width Extension Guide Line (Blue) | Indicates the estimated vehicle width. |
| (6) | Distance Guide Line (Yellow) | Moves together with estimated guide lines in sync with the steering wheel. The center of the line indicates a position on the ground about 1.0 m (3.0 ft.) behind the rear bumper. |
| (7) | Distance Guide Line (Red) | Moves together with estimated guide lines in sync with the steering wheel. The center of the line indicates a position on the ground about 0.5 m (1.5 ft.) behind the rear bumper. |
| (a) | Mode Select Switch | Changes between standard and narrow modes. |
| (b) | Manual Assist Mode Switch | Changes between parallel parking assist mode and manual assist mode. |
| (c) | Warning Message Display Area | Area where warning messages are displayed. |
| OPERATION |
Parking Guide Line Mode (Manual Assist) of Parking Assist Monitor System
To use parking guide line mode in manual assist when parking the vehicle in a parking space, perform the following procedure:



Estimated Guide Line Mode (Manual Assist) of Parking Assist Monitor System
To use estimated guide line mode in manual assist when parking the vehicle in a parking space, perform the following procedure:



Parallel Parking Assist Mode of Parking Assist Monitor System
To use parallel parking assist mode to park the vehicle in the parking space, perform the following procedure:

| *1 | Target Parking Position | *a | Approximately 1 m (3.3 ft.) |


| *1 | Black and Yellow Vertical Line | - | - |

| *1 | Blue Outline | - | - |

| *1 | Blue Outline | - | - |

| *1 | The blue outline changes to red | - | - |

| *1 | Blue Guide Line | - | - |



| FAIL-SAFE |
The table below indicates the malfunction detection items for the components in this system.
| Malfunction Parts | Detection Item | Function |
| Steering Sensor |
| Displays "Guidance is unavailable" |
| Transmission of signal to indicate that neutral steering point correction is incomplete | Displays "System initializing" | |
| Rear Television Camera Assembly | Transmission of camera malfunction signal | Stop signal reception and displays a dark screen |
| Radio and Display Receiver Assembly | Malfunction of radio and display receiver assembly | Stops system operation |
| DIAGNOSIS |
The radio and display receiver assembly is equipped with a diagnosis function which can display a diagnosis menu for the parking assist monitor system. The method for entering the diagnosis menu screen is the same as the method used for the multi-display. For details, refer to the Repair Manual.