Home › Drivetrain · U660E AUTOMATIC TRANSMISSION / TRANSAXLE › PARK / NEUTRAL POSITION SWITCH

PARK / NEUTRAL POSITION SWITCH > INSPECTION

for Preparation Click here



1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    C188288E05
  1. Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.

    Standard Resistance:
    Tester Connection
    Shift Lever Position
    Specified Condition
    1 (RB) - 3 (PL)
    4 (B) - 9 (L)
    P
    Below 1 Ω
    Except P
    10 kΩ or higher
    1 (RB) - 2 (RL)
    R
    Below 1 Ω
    Except R
    10 kΩ or higher
    1 (RB) - 8 (NL)
    4 (B) - 9 (L)
    N
    Below 1 Ω
    Except N
    10 kΩ or higher
    1 (RB) - 7 (DL)
    D, S, "+" or "-"
    Below 1 Ω
    Except D, S, "+" and "-"
    10 kΩ or higher

    Text in Illustration 
    *a
    Component without harness connected
    (Park/Neutral Position Switch)
    If the result is not as specified, replace the park/neutral position switch assembly.