Home › Audio/Visual/Telematics › CELLULAR COMMUNICATION › BACK-UP BATTERY

BACK-UP BATTERY > INSTALLATION

for Preparation Click here



1. INSTALL BACK-UP BATTERY


2. INSTALL NO. 3 DCM (TELEMATICS TRANSCEIVER) BRACKET
  1. Install the No. 3 DCM (telematics transceiver) bracket with the nut.



3. INSTALL DCM (TELEMATICS TRANSCEIVER) WITH BACK-UP BATTERY
  1. Engage the 2 guides to the vehicle body to temporarily install the DCM (telematics transceiver) with back-up battery.

  1. Install the DCM (telematics transceiver) with back-up battery with the bolt.

  1. Connect each connector.

  1. Engage the 3 clamps.



4. INSTALL AUDIO AMPLIFIER COVER
  1. Install the audio amplifier cover with the 2 clips.



5. INSTALL FRONT SEAT ASSEMBLY RH
(Click here)


6. DCM ACTIVATION

HINT:
When replacing the DCM (telematics transceiver) assembly, perform vehicle contract setting (Click here).