PARKING BRAKE ASSEMBLY > DISASSEMBLY |
| 1. REMOVE REAR WHEEL |
| 2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY |
![]() |
Remove the bolt and separate the rear flexible hose from the rear shock absorber.
Remove the 2 bolts, and separate the rear disc brake caliper assembly.
| 3. REMOVE PARKING BRAKE SHOE ADJUSTING HOLE PLUG |
| 4. REMOVE REAR DISC |
![]() |
Put matchmarks on the rear disc and the rear axle hub.
| *a | Matchmark |
![]() |
Release the parking brake and remove the rear disc.
| 5. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING (for Front Side) |
![]() |
Remove the parking brake shoe return tension spring.
| 6. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING (for Rear Side) |
![]() |
Remove the parking brake shoe return tension spring.
| 7. REMOVE PARKING BRAKE SHOE HOLD DOWN COMPRESSION SPRING (for Front Side) |
![]() |
Using SST, remove the parking brake shoe hold down compression spring.
| 8. REMOVE PARKING BRAKE SHOE STRUT |
![]() |
Pull the No. 1 parking brake shoe assembly towards the front of the vehicle by hand as shown in the illustration.
![]() |
Remove the parking brake shoe strut.
| 9. REMOVE PARKING BRAKE SHOE HOLD DOWN COMPRESSION SPRING (for Rear Side) |
![]() |
Using SST, remove the parking brake shoe hold down compression spring.
| 10. SEPARATE PARKING BRAKE SHOE LEVER |
![]() |
Expand the No. 1 and No. 2 parking brake shoe assemblies outward by hand and pull downward to separate them from the parking brake plate.
Separate the parking brake shoe lever from the No. 2 parking brake shoe assembly.
| 11. REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET |
![]() |
Remove the parking brake shoe adjusting screw set.
| 12. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY |
![]() |
Remove the No. 1 parking brake shoe assembly.
| 13. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING (for Lower Side) |
![]() |
Remove the parking brake shoe return tension spring.
| 14. REMOVE PARKING BRAKE SHOE LEVER |
![]() |
Using needle-nose pliers, remove the parking brake shoe lever from the No. 3 parking brake cable assembly as shown in the illustration.
| 15. REMOVE PARKING BRAKE SHOE HOLD DOWN SPRING PIN |
![]() |
Remove the parking brake shoe hold down spring pin (for front side).
![]() |
Remove the parking brake shoe hold down spring pin (for rear side).