Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR SPOILER

REAR SPOILER > INSTALLATION

for Preparation Click here



1. INSTALL NO. 3 REAR SPOILER PROTECTOR
  1. Clean the rear spoiler.

    1. Remove any double-sided tape from the rear spoiler.

    2. Wipe off any tape adhesive residue with cleaner.

  1. Install 2 new No. 3 rear spoiler protectors.

    1. Remove the release paper from the 2 No. 3 rear spoiler protectors.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.

    2. Install a 2 new No. 3 rear spoiler protectors.



2. INSTALL NO. 4 REAR SPOILER PROTECTOR
  1. Clean the rear spoiler.

    1. Remove any double-sided tape from the rear spoiler.

    2. Wipe off any tape adhesive residue with cleaner.



  1. Install 2 new No. 4 rear spoiler protectors.

    1. Remove the release paper from the 2 No. 4 rear spoiler protectors.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.



    2. Install 2 new No. 4 rear spoiler protectors as shown in the illustration.


      B295416E01


      Standard Measurement 
      Dimension
      Measurement
      Dimension
      Measurement
      A
      5.2 mm (0.205 in.)
      B
      5.2 mm (0.205 in.)



3. INSTALL NO. 5 REAR SPOILER PROTECTOR
  1. Clean the rear spoiler.

    1. Remove any double-sided tape from the rear spoiler.

    2. Wipe off any tape adhesive residue with cleaner.



  1. Install 2 new No. 5 rear spoiler protectors.

    1. Remove the release paper from the 2 No. 5 rear spoiler protectors.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.



    2. Install a 2 new No. 5 rear spoiler protectors as shown in the illustration.


      B295417E01


      Standard Measurement 
      Dimension
      Measurement
      Dimension
      Measurement
      A
      38.0 mm (1.5 in.)
      B
      38.0 mm (1.5 in.)



4. INSTALL REAR SPOILER SUB-ASSEMBLY
  1. When replacing the rear spoiler with a new one:

    1. Install the 2 stud bolts to the rear spoiler.

  1. Install 2 new gaskets to the rear spoiler.

  1. Install 4 new clips to the rear spoiler.

  1. Clean the rear spoiler.

    1. Remove any double-sided tape from the rear spoiler.

    2. Wipe off any tape adhesive residue with cleaner.

  1. Install a new No. 2 rear spoiler protector.

    1. Remove the release paper from the No. 2 rear spoiler protector.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.

    2. Install a new No. 2 rear spoiler protector.

      HINT:
      Use the same procedure for the RH side and LH side.



  1. Install the No. 1 rear spoiler protector.

    1. Remove the release paper from the No. 1 rear spoiler protector.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.



    2. Install the No. 1 rear spoiler protector as shown in the illustration.


      B295413E01


      Standard Measurement 
      Dimension
      Measurement
      Dimension
      Measurement
      A
      5.0 mm (0.197 in.)
      B
      5.0 mm (0.197 in.)

  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.



  1. Install the rear spoiler sub-assembly.

    1. Using a heat light, heat the vehicle body and rear spoiler sub-assembly.

    2. Remove the release paper from the rear spoiler sub-assembly.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.



    3. B280074
    4. Engage the 4 clips.

    5. Install the rear spoiler sub-assembly with the 2 nuts.



5. INSTALL LUGGAGE COMPARTMENT DOOR COVER


    B280555
  1. Install the luggage compartment door cover with the 13 clips.