Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROCKER PANEL MOULDING

ROCKER PANEL MOULDING > REMOVAL

for Preparation Click here



1. REMOVE FRONT ROCKER PANEL MOULDING END COVER


    B280028
  1. Remove the 2 screws and front rocker panel moulding end cover.



2. REMOVE ROCKER PANEL MOULDING


  1. Put protective tape around the rocker panel moulding and door.


    B280022E01


    Text in Illustration 
    *1
    Protective Tape
    -
    -



    B280027
  1. Remove the 2 screws and grommet.



    B280026
  1. Remove the screw.



    B280023
  1. Remove the 7 clips.



    B280025
  1. Remove the screw.



    B280024
  1. Disengage the 10 clips and remove the rocker panel moulding.

  1. Remove the 10 clips from the rocker panel moulding.