REAR POWER OUTLET SOCKET > REMOVAL |
| 1. REMOVE FRONT PANEL GARNISH LH |
![]() |
Disengage the 3 claws, 2 clips and 8 guides to remove the front panel garnish LH.
| 2. REMOVE FRONT PANEL GARNISH RH |
![]() |
Disengage the 3 claws, 2 clips and 8 guides to remove the front panel garnish RH.
| 3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Turn the shift lever knob sub-assembly counterclockwise and remove the shift lever knob sub-assembly.
| 4. REMOVE REAR CONSOLE UPPER PANEL SUB-ASSEMBLY |
Move the shift lever to N.
![]() |
Disengage the 4 clips.
w/ Seat heater System:
Disconnect the 2 connectors.
Disconnect the connector and remove the rear console upper panel sub-assembly.
| 5. REMOVE UPPER CONSOLE BOX SUB-ASSEMBLY |
![]() |
Remove the 2 screws.
![]() |
Disengage the 4 clips and remove the upper console box sub-assembly as shown in the illustration.
w/ Power Outlet Socket:
![]() |
Disengage the clamp.
Disconnect the connector to remove the upper console box sub-assembly.
| 6. REMOVE NO. 3 POWER OUTLET SOCKET ASSEMBLY |
![]() |
Turn the No. 3 power outlet socket assembly in the direction shown in the illustration to disengage the claw.
![]() |
Using a screwdriver, disengage the claw, and then push in the No. 3 power outlet socket assembly until the protrusion of the No. 3 power outlet socket assembly comes into contact with the No. 2 power outlet socket cover.
![]() |
As shown in the illustration, align the protrusion of the No. 3 power outlet socket assembly and the notch of the No. 2 power outlet socket cover.
![]() |
Using a screwdriver, disengage the claw and remove the No. 3 power outlet socket assembly from the No. 2 power outlet socket cover.
| 7. REMOVE NO. 2 POWER OUTLET SOCKET COVER |
![]() |
Disengage the 2 claws and remove the No. 2 power outlet socket cover.