FUEL PUMP > DISASSEMBLY |
| 1. REMOVE FUEL SENDER GAUGE ASSEMBLY |
![]() |
Disconnect the 3 harness clamps.
![]() |
Remove the harness protector from the wire harness.
![]() |
Disconnect the connector of the fuel sender gauge assembly.
![]() |
Release the lock as shown in the illustration and slide the fuel sender gauge assembly to remove it.
| 2. REMOVE FUEL PUMP |
![]() |
Disconnect the connector of the fuel pump harness.
![]() |
Disconnect the fuel pump filter hose.
![]() |
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws, and remove the fuel filter and fuel pump from the fuel sub-tank.
| *1 | Fuel Tube |
| *2 | Fuel Sub-tank |
![]() |
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the No. 1 fuel suction support.
![]() |
Using a screwdriver with its tip wrapped in protective tape, disengage the 5 claws, and remove the fuel pump from the fuel filter.
| *1 | Fuel Filter |
| *2 | Suction Filter |
![]() |
Disconnect the fuel pump harness connector.
![]() |
Remove the fuel pump filter seal from the fuel pump. If the fuel pump filter seal still remains in the fuel filter element, remove it using a wire tip (φ1 mm) that is formed as shown in the illustration.
| *1 | Fuel Pump Filter Seal |
| *a | 5.0 mm (0.197 in.) |
![]() |
Remove the fuel pump spacer from the fuel pump.