CENTER AIRBAG SENSOR ASSEMBLY > ON-VEHICLE INSPECTION |
| 1. INSPECT AIRBAG SENSOR ASSEMBLY (for Vehicle not Involved in Collision) |
Perform a diagnostic system check.
for Separate Type Yaw Rate Sensor: (Click here)
for Built-in Type Yaw Rate Sensor: (Click here)
| 2. INSPECT AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed) |
Perform a diagnostic system check.
for Separate Type Yaw Rate Sensor: (Click here)
for Built-in Type Yaw Rate Sensor: (Click here)
Visually check for defects with the airbag sensor assembly installed on the vehicle.
The defects are as follows:
| 3. INSPECT AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag is Deployed) |
Replace the airbag sensor assembly.