FRONT SEAT ASSEMBLY (for SIA Made Power Seat) > INSPECTION |
| 1. INSPECT SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY |
![]() |
Check the operation of the slide motor.
Check if the front seat cushion moves smoothly when the battery is connected to the slide motor connector terminals.
| *a | Component without harness connected (Slide Motor (Separate Type Front Seat Cushion Spring Assembly)) |
| Measurement Condition | Operational Direction |
| Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2 | Forward |
| Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 | Backward |
![]() |
Check the operation of the lifter motor. (for Driver)
Check if the front seat cushion moves smoothly when the battery is connected to the lifter motor connector terminals.
| *a | Component without harness connected (Lifter Motor (Separate Type Front Seat Cushion Spring Assembly)) |
| Measurement Condition | Operational Direction |
| Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2 | Upward |
| Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 | Downward |
![]() |
Check the operation of the front vertical motor. (for Driver)
Check if the front seat cushion moves smoothly when the battery is connected to the front vertical motor connector terminals.
| *a | Component without harness connected (Front Vertical Motor (Separate Type Front Seat Cushion Spring Assembly)) |
| Measurement Condition | Operational Direction |
| Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2 | Upward |
| Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 | Downward |
| 2. INSPECT SEPARATE TYPE FRONT SEAT BACK SPRING ASSEMBLY |
![]() |
Check the operation of the reclining motor.
Check if the front seat back moves smoothly when the battery is connected to the reclining motor connector terminals.
| *a | Component without harness connected (Reclining Motor (Separate Type Front Seat Back Spring Assembly)) |
| Measurement Condition | Operational Direction |
| Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2 | Forward |
| Battery negative (+) → Terminal 2 Battery positive (-) → Terminal 1 | Rearward |
![]() |
Check the operation of the lumbar support adjuster assembly. (for Driver)
Check that the front seat back moves smoothly when the battery is connected to the lumbar support adjuster assembly connector terminals.
| *a | Component without harness connected (Lumbar Support Adjuster Assembly (Separate Type Front Seat Back Spring Assembly)) |
| Measurement Condition | Operational Direction |
| Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2 | Seat back moves forward |
| Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 | Seat back moves backward |