FRONT SEAT ASSEMBLY (for TMMK Made Power Seat) > INSPECTION |
| 1. INSPECT FRONT SEAT FRAME WITH ADJUSTER ASSEMBLY LH |
![]() |
Check the operation of the slide motor.
Check if the front seat cushion moves smoothly when the battery is connected to the slide motor connector terminals.
| *a | Component without harness connected (Slide Motor (Front Seat Frame with Adjuster Assembly LH)) |
| Measurement Condition | Operational Direction |
| Battery positive (+) → Terminal 3 Battery negative (-) → Terminal 4 | Forward |
| Battery positive (+) → Terminal 4 Battery negative (-) → Terminal 3 | Backward |
![]() |
Check the operation of the lifter motor.
Check if the front seat cushion moves smoothly when the battery is connected to the lifter motor connector terminals.
| *a | Component without harness connected (Lifter Motor (Front Seat Frame with Adjuster Assembly LH)) |
| Measurement Condition | Operational Direction |
| Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 | Upward |
| Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2 | Downward |
![]() |
Check the operation of the front vertical motor.
Check if the front seat cushion moves smoothly when the battery is connected to the front vertical motor connector terminals.
| *a | Component without harness connected (Front Vertical Motor (Front Seat Frame with Adjuster Assembly LH)) |
| Measurement Condition | Operational Direction |
| Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2 | Upward |
| Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 | Downward |
| 2. INSPECT FRONT SEAT FRAME WITH ADJUSTER ASSEMBLY RH |
![]() |
Check the operation of the slide motor.
Check if the front seat cushion moves smoothly when the battery is connected to the slide motor connector terminals.
| *a | Component without harness connected (Slide Motor (Front Seat Frame with Adjuster Assembly RH)) |
| Measurement Condition | Operational Direction |
| Battery positive (+) → Terminal 3 Battery negative (-) → Terminal 4 | Forward |
| Battery positive (+) → Terminal 4 Battery negative (-) → Terminal 3 | Backward |
| 3. INSPECT FRONT SEAT BACK FRAME SUB-ASSEMBLY LH |
![]() |
Check the operation of the reclining motor.
Check if the front seat back moves smoothly when the battery is connected to the reclining motor connector terminals.
| *a | Component without harness connected (Reclining Motor (Front Seat Back Frame Sub-assembly LH)) |
| Measurement Condition | Operational Direction |
| Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 | Forward |
| Battery negative (+) → Terminal 1 Battery positive (-) → Terminal 2 | Rearward |
| 4. INSPECT FRONT SEAT BACK FRAME SUB-ASSEMBLY RH |
![]() |
Check the operation of the reclining motor.
Check if the front seat back moves smoothly when the battery is connected to the reclining motor connector terminals.
| *a | Component without harness connected (Reclining Motor (Front Seat Back Frame Sub-assembly RH)) |
| Measurement Condition | Operational Direction |
| Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 | Forward |
| Battery negative (+) → Terminal 1 Battery positive (-) → Terminal 2 | Rearward |