Home › Vehicle Exterior › DOOR / HATCH › HOOD SUPPORT

HOOD SUPPORT > DISPOSAL

for Preparation Click here



1. DISPOSE OF HOOD SUPPORT ASSEMBLY
  1. Horizontally hold the hood support in a vise with the piston-rod pulled out.



    B127037E06
  1. Wear safety glasses. Gradually cut a part between A and B shown in the illustration using a metal saw to release the gas.
    Area
    Measurement
    A-B
    100 mm (3.94 in.)

    NOTICE:
    Although the gas inside the hood support is colorless, odorless and harmless, there is a possibility that metal debris could scatter. Therefore, cover it with a piece of cloth or other material.