Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › OCCUPANT CLASSIFICATION SYSTEM

OCCUPANT CLASSIFICATION SYSTEM > TERMINALS OF ECU

for Preparation Click here



OCCUPANT DETECTION ECU

C238368E03


Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specification
d11-1 (+B) - d11-3 (GND)
W - W-B
Battery
Always
11 to 14 V
d11-2 (DIA) - d11-3 (GND)
GR - W-B
Diagnosis (DLC3)
Ignition switch ON, Techstream not connected to DLC3
Below 1 V
d11-3 (GND) - Body ground
W-B - Body ground
Ground
Always
Below 1 V
d11-4 (FSR-) - d11-3 (GND)
Y - W-B*1
LG - W-B*2
Airbag sensor assembly communication line
Always
Below 1 V
d11-5 (BGND) - d11-3 (GND)
P - W-B
Passenger side buckle switch ground line
Always
Below 1 V
d11-6 (IG) - d11-3 (GND)
B - W-B
Power source
Ignition switch ON
11 to 14 V
d11-7 (FSR+) - d11-4 (FSR-)
L - Y*1
L - LG*2
Airbag sensor assembly communication line
Ignition switch ON
Pulse generation
d11-8 (BSW) - d11-5 (BGND)
G - P
Passenger side buckle switch line
Always
Pulse generation
d8-1 (SVC3) - d8-5 (SGD3)*1
d18-1 (SVC3) - d18-5 (SGD3)*2
GR - W
Rear occupant classification sensor LH power supply line
Ignition switch ON
4.9 to 5.1 V
d8-2 (SVC4) - d8-6 (SGD4)*1
d18-2 (SVC4) - d18-6 (SGD4)*2
V - BR
Rear occupant classification sensor RH power supply line
Ignition switch ON
4.9 to 5.1 V
d8-3 (SIG3) - d8-5 (SGD3)*1
d18-3 (SIG3) - d18-5 (SGD3)*2
Y - W*1
SB - W*2
Rear occupant classification sensor LH signal line
Ignition switch ON
Pulse generation
d8-4 (SIG4) - d8-6 (SGD4)*1
d18-4 (SIG4) - d18-6 (SGD4)*2
B - BR
Rear occupant classification sensor RH signal line
Ignition switch ON
Pulse generation
d8-5 (SGD3) - d11-3 (GND)*1
d18-5 (SGD3) - d11-3 (GND)*2
W - W-B
Rear occupant classification sensor LH ground line
Always
Below 1 V
d8-6 (SGD4) - d11-3 (GND)*1
d18-6 (SGD4) - d11-3 (GND)*2
BR - W-B
Rear occupant classification sensor RH ground line
Always
Below 1 V
  1. *1: for TMMK Made
  2. *2: for SIA Made