Function
| Outline
|
Manual lock and unlock function
| This function can lock or unlock all doors by the door control switch operation.
|
Key-linked lock and unlock function
| This function, which is linked with the mechanical key cylinder, can lock or unlock all doors when a lock or unlock operation is performed.
|
Manual unlock prohibition function
| When the condition below is met, unlocking the vehicle using the door control switch will be prohibited:
- The doors are locked using a key-linked operation, wireless key operation*1 or smart key operation*2 with all doors closed.
|
Key lock-in prevention function
| When the key is in the vehicle*2 or ignition key cylinder*3, performing the door lock operation will not lock the door.
|
Key-linked 2-step unlock function
| Unlocks only the driver door by turning the key cylinder once and unlocks the other doors by turning it twice.
|
Shift-linked automatic door lock function*4
| When the conditions listed below are met consecutively, this function causes all doors to be automatically locked:
- All doors are closed.
- The ignition switch is ON.
- With the shift lever in P, the shift lever is moved to any position other than P.
- Any of the doors is unlocked.
|
Shift-linked automatic door unlock function
| When the conditions listed below are met consecutively, this function causes all doors to be automatically unlocked:
- The ignition switch is ON.
- With the shift lever in any position other than P, the shift lever is moved to P.
|
Speed-sensitive automatic door lock function*5
| When the conditions listed below are met consecutively, this function causes all doors to be automatically locked:
- Vehicle speed is higher than approximately 20 km/h (12 mph).
- All doors are closed.
- Any of the doors is unlocked.
|
Driver door-linked automatic door unlock*4
| All doors are unlocked automatically when the driver door is opened within 10 seconds after the ignition switch is turned from ON to off.
|