Home › Vehicle Interior › SEAT › FRONT SEAT CUSHION HEATER

FRONT SEAT CUSHION HEATER > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH (for TMMK Made)


    B279966E01
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Front Seat Cushion Heater Assembly LH)

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    A-1 - B-3
    Always
    Below 1 Ω
    A-2 - A-5
    20°C (68°F) to 25°C (77°F)
    9 to 13.8 kΩ
    A-2 - B-1
    20°C (68°F) to 25°C (77°F)
    9 to 13.8 kΩ
    A-2 - C-1
    20°C (68°F) to 25°C (77°F)
    9 to 13.8 kΩ
    A-2 - C-1
    20°C (68°F) to 25°C (77°F)
    9 to 13.8 kΩ
    A-2 - C-2
    20°C (68°F) to 25°C (77°F)
    9 to 13.8 kΩ
    A-2 - A-3
    20°C (68°F) to 25°C (77°F)
    9 to 13.8 kΩ
    A-3 - C-1
    Always
    Below 1 Ω
    A-3 - B-1
    20°C (68°F) to 25°C (77°F)
    3.2 to 4.1 Ω
    A-3 - A-5
    20°C (68°F) to 25°C (77°F)
    3.2 to 4.1 Ω
    A-3 - C-2
    20°C (68°F) to 25°C (77°F)
    3.2 to 4.1 Ω
    A-4 - B-2
    Always
    Below 1 Ω
    A-5 - B-1
    Always
    Below 1 Ω
    A-5 - C-2
    Always
    Below 1 Ω
    A-5 - C-1
    20°C (68°F) to 25°C (77°F)
    3.2 to 4.1 Ω

    If the result is not as specified, replace the front seat cushion heater assembly LH.



2. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH (for TMMK Made)


    B279966E01
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Front Seat Cushion Heater Assembly RH)

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    A-1 - B-3
    Always
    Below 1 Ω
    A-2 - A-5
    20°C (68°F) to 25°C (77°F)
    9 to 13.8 kΩ
    A-2 - B-1
    20°C (68°F) to 25°C (77°F)
    9 to 13.8 kΩ
    A-2 - C-1
    20°C (68°F) to 25°C (77°F)
    9 to 13.8 kΩ
    A-2 - C-1
    20°C (68°F) to 25°C (77°F)
    9 to 13.8 kΩ
    A-2 - C-2
    20°C (68°F) to 25°C (77°F)
    9 to 13.8 kΩ
    A-2 - A-3
    20°C (68°F) to 25°C (77°F)
    9 to 13.8 kΩ
    A-3 - C-1
    Always
    Below 1 Ω
    A-3 - B-1
    20°C (68°F) to 25°C (77°F)
    3.2 to 4.1 Ω
    A-3 - A-5
    20°C (68°F) to 25°C (77°F)
    3.2 to 4.1 Ω
    A-3 - C-2
    20°C (68°F) to 25°C (77°F)
    3.2 to 4.1 Ω
    A-4 - B-2
    Always
    Below 1 Ω
    A-5 - B-1
    Always
    Below 1 Ω
    A-5 - C-2
    Always
    Below 1 Ω
    A-5 - C-1
    20°C (68°F) to 25°C (77°F)
    3.2 to 4.1 Ω

    If the result is not as specified, replace the front seat cushion heater assembly RH.



3. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH (for SIA Made)


    B270969E03
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Front Seat Cushion Heater Assembly LH)

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    A-1 - B-1
    Always
    Below 1 Ω
    A-4 - B-2
    Always
    Below 1 Ω
    A-1 - A-4
    Always
    3.21 to 3.85 Ω
    B-1 - B-2
    Always
    3.39 to 4.07 Ω
    A-2 - A-3
    15°C (59°F) to 30°C (86°F)
    4.9 to 8.2 kΩ

    If the result is not as specified, replace the front seat cushion heater assembly LH.



4. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH (for SIA Made)


    B270969E03
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Front Seat Cushion Heater Assembly RH)

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    A-1 - B-1
    Always
    Below 1 Ω
    A-4 - B-2
    Always
    Below 1 Ω
    A-1 - A-4
    Always
    3.21 to 3.85 Ω
    B-1 - B-2
    Always
    3.39 to 4.07 Ω
    A-2 - A-3
    15°C (59°F) to 30°C (86°F)
    4.9 to 8.2 kΩ

    If the result is not as specified, replace the front seat cushion heater assembly RH.