Home › Vehicle Exterior › WINDOW / GLASS › FRONT PASSENGER SIDE POWER WINDOW SWITCH

FRONT PASSENGER SIDE POWER WINDOW SWITCH > INSPECTION

for Preparation Click here



1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY


  1. Check the switch function.



      B164433E20
    1. Measure the resistance when the switch is operated according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      1 (D) - 2 (SD)
      UP
      Below 1 Ω
      3 (B) - 4 (U)
      Below 1 Ω
      1 (D) - 2 (SD)
      off
      Below 1 Ω
      4 (U) - 5 (SU)
      Below 1 Ω
      4 (U) - 5 (SU)
      DOWN
      Below 1 Ω
      1 (D) - 3 (B)
      Below 1 Ω

      Text in Illustration 
      *a
      Component without harness connected
      (Power Window Regulator Switch Assembly (for Front Passenger Door))
      If the result is not as specified, replace the power window regulator switch assembly (for front passenger door).