Home › Audio/Visual/Telematics › PARK ASSIST / MONITORING › REAR VIEW MONITOR SYSTEM

REAR VIEW MONITOR SYSTEM > SYSTEM DESCRIPTION

for Preparation Click here



GENERAL
  1. To assist the driver with parking the vehicle by displaying an image of the area behind the vehicle, this system has a rear television camera assembly mounted on the luggage compartment door. The system displays the image on the navigation ECU sub-assembly*1 or radio and display receiver assembly*2.

    1. *1: for Navigation receiver type
    2. *2: for Radio and display type

  2. The rear view monitor system consists of the following components:

    1. Rear television camera assembly

    2. Park/neutral position switch assembly

    3. Navigation ECU sub-assembly*1 or radio and display receiver assembly*2

      1. *1: for Navigation receiver type
      2. *2: for Radio and display type


FUNCTION OF COMPONENTS

Item
Function
Rear Television Camera Assembly
  1. Mounted on the luggage compartment door to transmit an image of the area behind the vehicle to the navigation ECU sub-assembly*1 or radio and display receiver assembly*2.
  2. Has a color video camera that uses a Complementary Metal Oxide Semiconductor (CMOS) and a wide-angle lens.
Navigation ECU Sub-assembly*1
Radio and Display Receiver Assembly*2
  1. Receives video signals, which contain an image of the area behind the vehicle taken with the television camera assembly.
  2. Performs control of the system by receiving the reverse signal from the park/neutral position switch assembly.
Park/Neutral Position Switch Assembly
  1. Transmits a reverse signal to the navigation ECU sub-assembly*1.
  2. Transmits a reverse signal to the radio and display receiver assembly*2.
  1. *1: for Navigation receiver type
  2. *2: for Radio and display type

OPERATION EXPLANATION
  1. The navigation ECU sub-assembly*1 or radio and display receiver assembly*2 receives the reverse signal when the ignition switch is turned to ON and the shift lever is moved to R. After receiving the reverse signal, the navigation ECU sub-assembly*1 or radio and display receiver assembly*2 switches to the rear view monitor system.

    1. *1: for Navigation receiver type
    2. *2: for Radio and display type