Home › Drivetrain ยท U660E AUTOMATIC TRANSMISSION / TRANSAXLE › ATF TEMPERATURE SENSOR

ATF TEMPERATURE SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL ATF TEMPERATURE SENSOR ASSEMBLY
  1. Coat a new O-ring with ATF and install it to the ATF temperature sensor assembly.

  1. Coat the 4 bolts with ATF.



    C139240E11
  1. Install the ATF temperature sensor assembly and clamp to the valve body with the 4 bolts.
    Text in Illustration 
    *a
    Clamp

    Torque:
    11 N*m{ 112 kgf*cm , 8 ft.*lbf }

    Bolt length:
    Bolt A:
    25 mm (0.984 in.)
    Bolt B:
    85 mm (3.35 in.)

  1. Connect the connector.



2. INSTALL VALVE BODY OIL STRAINER ASSEMBLY