VALVE BODY ASSEMBLY > REMOVAL |
| 1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY |
| 2. REMOVE TORQUE CONVERTER ASSEMBLY |
![]() |
Remove the torque converter assembly from the automatic transaxle assembly.
| 3. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY |
![]() |
Remove the 19 bolts and automatic transaxle oil pan sub-assembly from the transaxle case sub-assembly.
| 4. REMOVE AUTOMATIC TRANSAXLE OIL PAN GASKET |
Remove the automatic transaxle oil pan gasket.
| 5. REMOVE TRANSMISSION OIL CLEANER MAGNET |
![]() |
Remove the 2 transmission oil cleaner magnets from the automatic transaxle oil pan sub-assembly.
| *1 | Transmission Oil Cleaner Magnet |
![]() |
Examine particles in the automatic transaxle oil pan sub-assembly.
Collect any steel chips with the removed magnets. Look carefully at the chips and particles in the automatic transaxle oil pan sub-assembly and on the transmission oil cleaner magnets to see the type of wear which might be found in the automatic transaxle assembly.
| Steel (magnetic) | Brass (non-magnetic) |
| Bearing, gear and plate wear | Bushing wear |
| 6. REMOVE VALVE BODY OIL STRAINER ASSEMBLY |
![]() |
Remove the 2 bolts and valve body oil strainer assembly from the transmission valve body assembly.
![]() |
Remove the O-ring from the valve body oil strainer assembly.
| 7. REMOVE TRANSMISSION VALVE BODY ASSEMBLY |
![]() |
Remove the 11 bolts and transmission valve body assembly from the transaxle case sub-assembly.
| 8. REMOVE NO. 1 GOVERNOR APPLY GASKET |
![]() |
Remove the 2 No. 1 governor apply gaskets from the transaxle case sub-assembly.
| 9. REMOVE MANUAL VALVE |
![]() |
Remove the manual valve from the transmission valve body assembly.