Home › Engine / Hybrid System ยท 2GR-FE › ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE

CAMSHAFT OIL CONTROL VALVE > REMOVAL

for Preparation Click here



1. REMOVE INTAKE AIR SURGE TANK ASSEMBLY
(Click here).


2. DISCONNECT ENGINE WIRE


    A254995E01
  1. Disconnect the 3 wire harness clamps.
    Text in Illustration 
    *a
    for Bank 2
    *b
    for Bank 1

  1. Remove the 2 bolts and 2 wire harness brackets.



3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
  1. Disconnect the 4 oil control valve connectors.



    A255500E01
  1. Remove the 4 bolts and 4 oil control valves.
    Text in Illustration 
    *a
    for Intake Side
    *b
    for Exhaust Side
    *c
    for Bank 2
    *d
    for Bank 1



    A090053E06
  1. Remove the O-ring from each oil control valve.
    Text in Illustration 
    *1
    O-ring