CAMSHAFT OIL CONTROL VALVE > REMOVAL |
| 1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY |
![]() |
Lift the rear of the engine cover to detach the cover from the 2 pins, and then lift the front of the engine cover to detach the cover from the pin and remove the engine cover.
| 2. SEPARATE ENGINE WIRE |
![]() |
Remove the 2 nuts and separate the engine wire.
| 3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY |
Camshaft timing oil control valve assembly (for exhaust side)
![]() |
Disconnect the oil control valve connector.
Remove the bolt and oil control valve.
![]() |
Remove the O-ring from the oil control valve.
| *1 | O-ring |
Camshaft timing oil control valve assembly (for intake side)
![]() |
Disconnect the oil control valve connector.
Remove the bolt and oil control valve.
![]() |
Remove the O-ring from the oil control valve.
| *1 | O-ring |