Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM (for 2AR-FE with Wireless Door Lock)

DTC    C1521    Motor Circuit Malfunction

DTC    C1522    Motor Circuit Malfunction

DTC    C1523    Motor Circuit Malfunction

DTC    C1524    Motor Circuit Malfunction

DTC    C1528    Motor Rotation Angle Sensor Malfunction

DTC    C1531    ECU Malfunction

DTC    C1532    ECU Malfunction

DTC    C1533    ECU Malfunction

DTC    C1534    ECU Malfunction

DTC    C1555    Motor Relay Welding Failure

for Preparation Click here


DESCRIPTION

The power steering ECU assembly detects steering force using the signal received from the steering torque sensor, and also monitors the motor circuit for errors.

DTC No.
DTC Detection Condition
Trouble Area
C1521
Motor overcurrent
Power steering ECU assembly
C1522
Motor current sensor malfunction
C1523
Excessively large current deviation
C1524
Short (or open) in motor circuit or abnormal voltage or current in motor circuit
C1528
Motor rotation angle sensor malfunction
C1531
ECU internal malfunction
(CPU malfunction)
C1532
ECU internal malfunction
(Peripheral circuit malfunction)
C1533
ECU internal malfunction
(Substrate temperature sensor malfunction)
C1534
ECU internal malfunction
(EEPROM error)
C1555
Motor relay circuit malfunction

INSPECTION PROCEDURE

NOTICE:
If the power steering ECU assembly has been replaced with a new one, perform assist map writing and torque sensor zero point calibration (Click here).

1.REPLACE POWER STEERING ECU ASSEMBLY
  1. Replace power steering ECU assembly (Click here).


NEXT

END