Home › Engine / Hybrid System ยท 2GR-FE › ENGINE CONTROL › INTEGRATION RELAY

INTEGRATION RELAY > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 RELAY BLOCK COVER


2. REMOVE NO. 1 INTEGRATION RELAY


    A254789
  1. Disconnect the connector.



    A254790
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and disconnect the No. 1 integration relay.



    A254791
  1. Disconnect the 4 connectors and remove the No. 1 integration relay.