ENGINE IMMOBILISER SYSTEM (w/o Smart Key System) > DTC CHECK / CLEAR |
| CHECK FOR TRANSPONDER KEY ECU ASSEMBLY DTC |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Body Electrical / Immobiliser / Trouble Codes.
Check the details of the DTC(s) (Click here).
| CHECK FOR ECM DTC |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
Check the details of the DTC(s) (Click here for engine immobiliser system, Click here for SFI system).
| CLEAR TRANSPONDER KEY ECU ASSEMBLY DTC |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Body Electrical / Immobiliser / Trouble Codes.
Clear the DTC(s).
| CLEAR ECM DTC |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
Clear the DTC(s).