REMOTE ENGINE STARTER SYSTEM > DTC CHECK / CLEAR |
| CHECK REMOTE ENGINE STARTER ECU DTC |
Connect the Techstream to the DLC3.
Turn the engine switch on (IG).
Turn the Techstream on.
Enter the following menus: Body Electrical / Remote Engine Starter / Trouble Codes.
Check the details of the DTC(s) (Click here).
| CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) DTC |
Connect the Techstream to the DLC3.
Turn the engine switch on (IG).
Turn the Techstream on.
Enter the following menus: Body Electrical / Smart Key / Trouble Codes.
Check the details of the DTC(s) (Click here).
| CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) DTC |
Connect the Techstream to the DLC3.
Turn the engine switch on (IG).
Turn the Techstream on.
Enter the following menus: Body Electrical / Main Body / Trouble Codes.
Check the details of the DTC(s) (Click here).
| CLEAR REMOTE ENGINE STARTER ECU DTC |
Connect the Techstream to the DLC3.
Turn the engine switch on (IG).
Turn the Techstream on.
Enter the following menus: Body Electrical / Remote Engine Starter / Trouble Codes.
Clear the DTCs.
| CLEAR CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) DTC |
Connect the Techstream to the DLC3.
Turn the engine switch on (IG).
Turn the Techstream on.
Enter the following menus: Body Electrical / Smart Key / Trouble Codes.
Clear the DTCs.
| CLEAR MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) DTC |
Connect the Techstream to the DLC3.
Turn the engine switch on (IG).
Turn the Techstream on.
Enter the following menus: Body Electrical / Main Body / Trouble Codes.
Clear the DTCs.