AIR CONDITIONING UNIT > DISASSEMBLY |
| 1. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY |
![]() |
Disengage the 2 claws and guide, and remove the No. 1 air duct sub-assembly as shown in the illustration.
| 2. REMOVE NO. 6 HEATER TO REGISTER DUCT ASSEMBLY |
![]() |
Disengage the 2 claws and 2 guides, and remove the No. 6 heater to register duct assembly as shown in the illustration.
| 3. REMOVE COOLER THERMISTOR HOSE (for Automatic Air Conditioning System) |
![]() |
Disengage the clamp and remove the cooler thermistor hose.
| 4. REMOVE ASPIRATOR |
![]() |
Disengage the 2 claws and remove the aspirator.
| 5. REMOVE AIR CONDITIONING HARNESS ASSEMBLY (for Manual Air Conditioning System) |
![]() |
Remove the heater packing as shown in the illustration.
![]() |
Disconnect the 4 connectors.
Disengage the 5 clamps and remove the air conditioning harness assembly.
| 6. REMOVE AIR CONDITIONING HARNESS ASSEMBLY (for Automatic Air Conditioning System) |
![]() |
Remove the heater packing as shown in the illustration.
![]() |
Disconnect the 5 connectors.
Disengage the 5 clamps and remove the air conditioning harness assembly.
| 7. REMOVE COOLER EXPANSION VALVE |
![]() |
Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and cooler expansion valve.
| 8. REMOVE BLOWER ASSEMBLY WITH COOLER EVAPORATOR SUB-ASSEMBLY |
![]() |
Remove the 6 screws.
Disengage the 4 claws and remove the blower assembly with cooler evaporator sub-assembly.
| 9. REMOVE NO. 1 COOLER THERMISTOR |
![]() |
Disengage the 2 clamps.
Remove the No. 1 cooler thermistor.
| 10. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY |
![]() |
Remove the No. 1 cooler evaporator sub-assembly from the blower assembly as shown in the illustration.
![]() |
Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.
| 11. REMOVE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System) |
![]() |
Remove the 2 screws and No. 2 air conditioning radiator damper servo sub-assembly.
| 12. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY |
![]() |
Disengage the 3 claws and remove the heater clamp.
![]() |
Remove the screw and clamp.
![]() |
Remove the heater radiator unit sub-assembly from the air conditioning radiator assembly as shown in the illustration.
| 13. REMOVE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY |
![]() |
Remove the 3 screws and then the No. 2 air conditioning radiator damper servo servo sub-assembly.