THERMOSTAT > REMOVAL |
| 1. DRAIN ENGINE COOLANT |
Loosen the radiator drain cock plug.
Loosen the 2 cylinder block drain cock plugs.
Remove the radiator cap sub-assembly.

| *1 | Radiator Cap Sub-assembly | *2 | Cylinder Block Drain Cock Plug |
| *3 | Radiator Drain Cock Plug | *4 | Air Drain Cock Plug |
| 2. REMOVE V-RIBBED BELT |
| 3. REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY |
![]() |
Remove the bolt, No. 2 idler pulley cover plate, No. 2 idler pulley sub-assembly and idler pulley cover plate.
| 4. DISCONNECT OUTLET RADIATOR HOSE |
![]() |
Disconnect the outlet radiator hose.
| 5. REMOVE WATER INLET |
![]() |
Remove the 2 nuts and water inlet.
| 6. REMOVE THERMOSTAT |
Remove the thermostat from the water inlet housing.
Remove the gasket from the thermostat.