DOOR CONTROL TRANSMITTER (w/o Smart Key System) > INSTALLATION |
| 1. INSTALL DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY (for Type A) |
![]() |
Install the door control transmitter module set sub-assembly into the transmitter housing case.
| 2. INSTALL TRANSMITTER HOUSING COVER (for Type A) |
![]() |
Install the transmitter housing cover to the transmitter housing case.
| 3. INSTALL DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY (for Type B) |
![]() |
Install the door control transmitter module set sub-assembly into the transmitter housing case.
| 4. INSTALL TRANSMITTER HOUSING COVER (for Type B) |
![]() |
Install the transmitter housing cover to the transmitter housing case.
Check that the transmitter LED illuminates when the switch is pressed.