DOOR CONTROL TRANSMITTER (w/o Smart Key System) > REMOVAL |
| 1. REMOVE TRANSMITTER HOUSING COVER (for Type A) |
![]() |
Using a precision screwdriver with its tip wrapped in protective tape, pry open the transmitter housing cover.
| *1 | Protective Tape |
| 2. REMOVE DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY (for Type A) |
![]() |
Using a precision screwdriver with its tip wrapped in protective tape, remove the door control transmitter module set sub-assembly from the transmitter housing case.
| *1 | Protective Tape |
| 3. REMOVE TRANSMITTER HOUSING COVER (for Type B) |
![]() |
Using a precision screwdriver with its tip wrapped in protective tape, pry open the transmitter housing cover.
| *1 | Protective Tape |
| 4. REMOVE DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY (for Type B) |
![]() |
Using a precision screwdriver with its tip wrapped in protective tape, remove the door control transmitter module set sub-assembly from the transmitter housing case.
| *1 | Protective Tape |