HEADLIGHT ASSEMBLY > DISASSEMBLY |
| 1. REMOVE NO. 1 HEADLIGHT BULB |
![]() |
Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.
| 2. REMOVE NO. 2 HEADLIGHT BULB (for Halogen Headlight) |
![]() |
Turn the No. 2 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.
| 3. REMOVE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY (for HID Headlight) |
for LH Side:
![]() |
Turn the headlight light control ECU sub-assembly in the direction indicated by the arrow shown in the illustration, and disconnect it.
for RH Side:
![]() |
Turn the headlight light control ECU sub-assembly in the direction indicated by the arrow shown in the illustration, and disconnect it.
![]() |
Disengage the clamp.
Turn the socket of the headlight light control ECU sub-assembly in the direction indicated by the arrow shown in the illustration, and remove it.
| 4. REMOVE DISCHARGE HEADLIGHT BULB (for HID Headlight) |
![]() |
Release the set spring as shown in the illustration and remove the discharge headlight bulb.
| 5. REMOVE HEADLIGHT SOCKET COVER |
for Halogen Headlight:
Remove the 2 headlight socket covers from the headlight unit.
for HID Headlight:
Remove the headlight socket cover from the headlight unit.
| 6. REMOVE FRONT TURN SIGNAL LIGHT BULB |
![]() |
Turn the front turn signal light socket with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.
Remove the front turn signal light bulb from the front turn signal light socket.
| 7. REMOVE FRONT SIDE MARKER LIGHT BULB |
![]() |
Turn the front side marker light socket with the front side marker light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.
Remove the front side marker light bulb from the front side marker light socket.