Home › Vehicle Exterior › DOOR / HATCH › LUGGAGE COMPARTMENT DOOR

LUGGAGE COMPARTMENT DOOR > DISASSEMBLY

for Preparation Click here



1. REMOVE LUGGAGE COMPARTMENT DOOR COVER


    B280555
  1. Remove the 13 clips and luggage compartment door cover.



2. REMOVE LUGGAGE COMPARTMENT DOOR CUSHION


    B287035
  1. Disengage the 2 claws and remove the 2 luggage compartment door panel cushions.



3. REMOVE LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (w/ Wireless Door Lock Control System)
  1. Disconnect the connector.



    B279154
  1. Remove the 2 bolts and disengage the luggage compartment door lock assembly.



    B279155
  1. Disengage the claw as shown in the illustration.



    B279156
  1. Disengage the luggage door lock control cable sub-assembly and remove the luggage compartment door lock assembly.



4. REMOVE LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (w/o Wireless Door Lock Control System)


    B279153
  1. Disconnect the luggage door lock control cable sub-assembly.

  1. Disconnect the connector.



    B279154
  1. Remove the 2 bolts and luggage compartment door lock assembly.



5. REMOVE LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY (w/o Wireless Door Lock Control System)


    B280556
  1. Disconnect the luggage door lock control cable sub-assembly.



    B280557
  1. Remove the 2 nuts and luggage compartment door lock cylinder assembly.



6. REMOVE REAR SPOILER SUB-ASSEMBLY (w/ Rear Spoiler)

HINT:
When removing the rear spoiler sub-assembly, heat the vehicle body and rear spoiler sub-assembly using a heat light.

Heating Temperature:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Rear Spoiler
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body, rear spoiler sub-assembly excessively.



    B280069E01
  1. Put protective tape around the rear spoiler sub-assembly.
    Text in Illustration 
    *1
    Protective Tape



    B280070
  1. Remove the 2 nuts.



  1. Insert a piano wire between the vehicle body and rear spoiler sub-assembly.


    B280071E01


    Text in Illustration 
    *1
    Wooden Block
    *2
    Piano Wire
    *3
    No. 1 Rear Spoiler Protector
    *4
    No. 2 Rear Spoiler Protector
    *5
    Clip
    *6
    Stud Bolt

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the No. 1 rear spoiler protector and 2 No. 2 rear spoiler protectors that holds the rear spoiler sub-assembly to the vehicle body.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Disengage the 4 clips and remove the rear spoiler sub-assembly.



  1. Remove the No. 1 rear spoiler protector.


    B295418



    B295459
  1. Remove the No. 2 rear spoiler protector.

    HINT:
    Use the same procedure for the RH side and LH side.

  1. Remove the 4 clips from the rear spoiler.

  1. Remove the 2 gaskets from the rear spoiler.

  1. When replacing the rear spoiler with a new one:

    1. Remove the 2 stud bolts from the rear spoiler.



7. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY
  1. w/ Smart Key System:

    1. Disconnect the connector.



  1. w/ Wireless Door Lock Control System:



      B280034E01
    1. Remove the 6 nuts.
      Text in Illustration 
      *A
      w/ Smart Key System
      *B
      w/ Wireless Door Lock Control System

  1. w/o Wireless Door Lock Control System:

    1. Remove the 4 nuts.



    B280030E01
  1. Put protective tape around the luggage compartment door outside garnish sub-assembly.
    Text in Illustration 
    *1
    Protective Tape
    *2
    Back Door Outside Garnish Clip

  1. Disengage the 3 clips and remove the luggage compartment door outside garnish sub-assembly.

  1. Remove the clip (back door outside garnish clip) and 2 clips from the luggage compartment door outside garnish sub-assembly.

  1. Remove the 6 gaskets from the luggage compartment door outside garnish sub-assembly.



8. REMOVE REAR TELEVISION CAMERA ASSEMBLY (w/ Rear Monitor)


    E223752
  1. Disconnect the connector.



    E223751
  1. Disengage the 2 claws to remove the rear television camera assembly.



9. REMOVE LICENSE PLATE LIGHT ASSEMBLY LH


    E226675
  1. Disconnect the connector.

  1. Disengage the 2 claws and remove the license plate light assembly.



10. REMOVE LICENSE PLATE LIGHT ASSEMBLY RH

HINT:
Use the same procedure for the RH side and LH side.



11. REMOVE REAR LIGHT ASSEMBLY LH


    E226671
  1. Disconnect the connector.

  1. Remove the 3 nuts and rear light assembly.



12. REMOVE REAR LIGHT ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.