WIPER SWITCH > REMOVAL |
| 1. REMOVE LOWER STEERING COLUMN COVER |
Release the tilt and telescopic lever, and fully extend and lower the steering column assembly.
Lock the tilt and telescopic lever.
![]() |
Turn the steering wheel assembly to the left and remove the screw.
![]() |
Turn the steering wheel assembly to the right and remove the screw.
![]() |
Push the right and left sides of the lower steering column cover to disengage the 2 claws.
![]() |
Insert your fingers into the opening of the tilt lever of the lower steering column cover to disengage the 2 claws.
| 2. REMOVE UPPER STEERING COLUMN COVER |
![]() |
Disengage the 4 clips and 2 guides to separate the instrument cluster finish panel assembly from the upper steering column cover.
![]() |
Disengage the 2 claws and remove the upper steering column cover.
| 3. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY |
![]() |
Disconnect the 2 connectors.
Using a screwdriver, disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.